Job Category: Engineer

Closing date: June 14, 2008
WANT TO BE PART OF SOMETHING BIG?
WE ARE LOOKING FOR OPERATIONS TECHNICAL STAFF

Qatargas Operating Company has many exciting and challenging
opportunities available for qualified professionals. Qatargas is
currently expanding three times its size by building four new LNG
trains and spending over $20 billion on its expansion projects in it's
pursuit to become the worlds leading LNG supplier. We seek
applications from suitably qualified personnel for the following key
positions:

ESU OPERATIONS DEPARTMENT

LNG/SRU AREA
Shift Supervisors
Must have a minimum of 8 years experience within sulfur recovery
plants. Familiar with CLAUS, superclaus and TGT processes. This
position is a senior supervisory level and you will be responsible for
a team pf operators reporting directly to Head of operation.

Panel Operator
Graduate/ Diploma with min. 8 years experience in LNG / LPG, gas
turbine and Gas Treating plant with through knowledge of process.
Control safe Start-up, Normal and Shutdown operations by DCS as per
established procedures / operating manuals and good industry practices.

Senior Operator
Diploma / NCTVT with a formal plant training and able to lead his team
on routine day to day process activities in LNG / LPG Refinery or Gas
Treating plant. Minimum 10 years Experience and out of which at least
4 years as Senior Operator.

Rover Operator
Diploma / NCTVT with a formal plant training with minimum 5 years
experience in LNG Plant, LPG Refinery or Gas Treating plant in the
same position. Thorough knowledge of Process is must.

COMMON LEAN PROJECT
Shift Supervisor
Must have min. 10 years of LNG storage and ship loading experience,
able to lead a team of 5, reporting to head of section.

Senior Operator/ Rover Operator
Must have min. 5 years of LNG storage and ship loading experience,
familiar with loading arms connection.

LIQUID BERTH
Senior Operator / Rover operator
Must have 5 years of HC storage and ship loading experience with
floating and conical roof tanks, able to connect/ disconnect ship
loading arms, reporting to panel operator.

RAS LAFFAN TERMINAL OPERATIONS DEPARTMENT

STORAGE AND LOADING
Panel Operator
Panel operator for storage tank and marine jetty loading of
condensate, LPG and refinery products.

Senior Operator
Senior operator for storage tank and marine jetty loading of
condensate, LPG and refinery products.

Rover Operator
Rover operator for storage tank and marine jetty loading of
condensate, LPG and refinery products.

COMMON SULFUR PROJECT
Day Supervisor
Day supervisor for Liquid sulphur granulation, solid storage handling
and ship loading facility.

Panel operator
Panel operator for Liquid sulphur granulation, solid storage handling
and ship loading facility.

Rover operator
Rover operator for Liquid sulphur granulation, solid storage handling
and ship loading facility.

BUSINESS DEPARTMENT
Documentation and Systems Specialist
Documentation system specialist to set up and manage a TDMS with
associated system support and administration. Degree in IT or Doc. Mgt
with 15 years + relevant experience.

OPERATIONS DEPARTMENT
Operations Advisor
Graduate Engineer (Chemical) with 20+ years experience of hydrocarbon
tank farm and marine loading experience to develop best practice in
operations safety and efficiency.

DEVELOPMENT DEPARTMENT
Handover Planning Lead
Graduate Engineer with 10+ yrs experience of operations startup,
maintenance, spares and documentation to oversee operational readiness
for startup of storage and marine loading facilities.

Controls Engineer
Graduate Control Engineer with 10+ years experience (Invensys systems
preferred) to manage design, maintenance and upgrade of DCS/ESD and
related systems for storage and marine loading facilities.

Facilities/Process Engineer
Graduate Chemical Engineer with 10+ years experience to perform (or
define) studies and prepare modification packages for tank farm and
marine loading equipment.

Inspection Engineer
Graduate QA/QC Engineer with 10+ years experience of storage tank,
marine jetty structure, piping and piperack inspection and asset
integrity management.

Metering Engineer
Graduate engineer (Chemical or Mechanical) with 10+ years experience
in design and operation of metering systems for hydrocarbon liquid
products.

Document Controller (Junior Staff)
Document controller with 10+ years experience to manage transition of
project documents for storage and loading facilities into TDMS.

Qatargas offers a secure expatriate lifestyle in an international
community with educational, medical and recreational facilities,
competitive tax-free salaries, a full range of benefits, including
family or bachelor housing, furnishings and generous paid annual
vacation back to your country of origin.

Recruitment is being conducted by Uzma Group a specialised supplier of
manpower to the oil & gas industry. Apply stating qualifications and
work experience to:


Uzma Group,
68 Fraser Business Park,
Jalan Metro Pudu 2, S5200 KL, Malaysia.

QATARGAS

For more information about Qatargas, the expatriate community,
benefits and Qatar in general, visit www.qatargas.com

Dear Moderator

Saya Anisa dari PT. Affix Consulting, kami Executive Search. Saya,
meminta izin moderator untuk menayangkan iklan kami. Atas izin yang
diberikan saya ucapkan terima kasih.
Dear Moderator

Saya Anisa dari PT. Affix Consulting, kami Executive Search. Saya,
meminta izin moderator untuk menayangkan iklan kami. Atas izin yang
diberikan saya ucapkan terima kasih.

Dear Moderator

Saya Anisa dari PT. Affix Consulting, kami Executive Search. Saya,
meminta izin moderator untuk menayangkan iklan kami. Atas izin yang
diberikan saya ucapkan terima kasih.
Urgent Requirement to PMA Company

Our client is the premier comfort and proses solutions provider
company in the business of creating comprehensive solutions for all
HVAC needs in Indonesia. Our client is inviting hogh professional to
join us as :

CUSTOMER SALES SERVICES MANAGER
Requirements :
Degree in Mechanical Engineering or Electrical Engineering or equivalent
Min. 2 or 3 years of networking and service sales experience
Candidaye with good business contacts especially HVAC industry would
be an added advantage
Resourceful, highly motivated, and able to work independently
Good communication, public relations skill, and leadership skills
Team player
Excellent spoken and written English
Send yours CV to or
Affix Consulting
Wisma Slipi 3rd Floor # 308
Jln. S Parman Kav.12
Jakarta
Phone : 021- 5305912/13 (anisa)
Fax : 021- 5307208

BUSINESS DEVELOPMENT ENGINEERS

Requirements :
Degree in Mechanical Engineering or Electrical Engineering or equivalent
Min. 2 or 3 years related sales experience preferably in technical
networking & support.
Candidaye with good business contacts especially HVAC industry would
be an added advantage
Resourceful, highly motivated, and able to work independently
Good communication, public relations skill, and leadership skills
Team player
Excellent spoken and written English

Send yours CV to or
Affix Consulting
Wisma Slipi 3rd Floor # 308
Jln. S Parman Kav.12
Jakarta
Phone : 021- 5305912/13 (anisa)
Fax : 021- 5307208

Closing date: June 13, 2008
URGENTLY REQUIRED
We are seeking for high caliber National candidates to join our
production and drilling oil & Gas projects. The incumbent responsible
for supervise, maintenance, HSE to all company's Rig operations.

1. Junior Geologist

Responsibility:
• To assist in providing geological support to team in drilling,
progressing the hopper and estimation of reserves
• The geological work will include reservoir studies, well targeting
and well planning
• The candidate will also be involved in Drilling Operations to ensure
successful drilling
• To assist the progress of wells and continues rig program

Qualification:
1. BS in Geoscience discipline
2. Oil and Gas experienced, 4 -5 years experience

2. Field Engineer

Responsibility:
• Supervise all the field operation

Qualification:
1. BS Engineering degree
2. Oil and Gas experience 4 – 5 years production field

3. HSE Field officer

Responsibility:
• Handling the Safety field operation

Qualification:
1. BS engineering degree
2. Experience in well and rig operation

4. Rig Superintendent
• Minimum 3D bachelor
• Minimum 10 years experience as Rig Superintendent position
• Have strong knowledge in Rigs equipment, logistic and operation as
Indonesia Oil and gas contractor.
• Experienced in operating Rig of 350 HP and 750 HP or larger.
• Must have a valid Well Control IADC or IWCFor MIGAS AP3 certificate

5. Tool Pusher
• Minimum High School Graduate (SMA)
• Minimum 8 years experience as Tool Pusher
• Have strong knowledge in Rigs equipment, Logistic and operation as
Indonesia Oil and Gas Contractor
• Experienced in preparing reports on Rigs and Activities and HSE
• Experienced in operating Rig of 350 HP and 750 HP or larger
• Must have a valid Well Control IADC or IWCF or MIGAS AP3 certificate

6. Drilling Engineer

Responsibilities:
• Preparing all the detail data for drilling such as offset wells,
well history from Reservoir Engineering, G&G, HSE and all for drilling
operations for Prabumulih in Sukaraja area and Betung & Senami in
Jambi area.
• Preparing Well AFE and drilling budget and schedule
• Responsible for Tender preparation for contracts, equipment and services
• Analysing and valuating all drilling operation
• Prepare drilling report and summary, and well close out
• Working mainly in head office and visiting site

Qualification:
• Minimum S1 in petroleum, electrical or equivalent engineering
• Minimum 10 years experience as Drilling Engineer
• Experienced well in handling KICK minimum once within 10 years
• Have ability to work under pressure with minimum supervisory
• IWCF supervisor level

Please send your resume to:

Closing date: June 11, 2008

Position: Business Dev Manager/Indonesia
Reports To: Indonesian Country Manager
Location: Jakarta
Department: Sales
Status: Exempt

Summary of Responsibilities
Direct sales efforts and oversee the training and development of the
staff and agents located in the region. Sell and support of inflatable
packers and downhole tools, equipment and supplies or services to new
and established customers.

Essential Duties and Responsibilities
• Develop sales strategy for establishing partnerships with other
oil/gas and/or drilling companies and to ensure direct customer
contact in the Indonesian region.
• Research prospective projects through telephone, travel, conference
attendance and utilization of the Internet or other sources.
• Coordinate the development of strategies, plans and business models
through development of close working relationships with internal
departments and external partners and alliances.
• Identify key customer relationships.
• Create financial projections for growth and profitability.
• Conduct sales meetings to review ongoing activities and future
opportunities.
• Perform other duties as assigned by supervisor.

SUPERVISORY RESPONSIBILITIES
May directly supervise some employees in the Indonesian sales area.
Carries out supervisory responsibilities in accordance with the
organization's policies and applicable laws. Responsibilities include
interviewing, hiring and training employees; planning, assigning and
directing work; appraising performance; rewarding and counseling
employees; addressing complaints and resolving problems.

QUALIFICATIONS
To perform this job successfully, an individual must be able to
perform each essential duty satisfactorily. The requirements listed
below are representative of the knowledge, skill and/or ability
required. Reasonable accommodations may be made to enable individuals
with disabilities to perform the essential functions.

Education/Experience
Requires Bachelor's Degree (B.A.) from four-year college or
university; or three to five years related experience and/or training;
or equivalent combination of education and experience. Seven to ten
years sales management experience and/or training in oilfield
equipment; specific experience in packers and/or downhole tools
preferred; or equivalent combination of education and experience. Must
be Bilingual (English and Indonesian, French would be an advantage).

Language Skills
Ability to read and interpret documents such as safety rules,
operating and maintenance instructions, and procedure manuals. Ability
to write routine reports and correspondence. Ability to effectively
present information and respond to questions from groups of managers,
clients, customers, and the general public. Bilingual required - English.

Mathematical Skills
Ability to calculate figures and amounts such as discounts, interest,
commissions, proportions, percentages, area, circumference and volume.
Ability to apply concepts of basic algebra and geometry.

Reasoning Ability
Ability to solve practical problems and deal with a variety of
concrete variables in situations where only limited standardization
exists. Ability to interpret a variety of instructions furnished in
written, oral, diagram, or schedule form.

Other Skills and Abilities
Ability to work under a minimum of supervision. Ability to read and
understand engineering drawings as they pertain to assembly of
inflatable packers or related downhole tools. Must demonstrate
effective organization and time management skills. Basic to
intermediate skills in MS Office products to include Word and Excel
and MRP or related systems. Familiarity with computer networks and e-mail.

PHYSICAL DEMANDS
The physical demands described here are representative of those that
must be met by an employee to successfully perform the essential
functions of this job. Reasonable accommodations may be made to enable
individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly
required to sit; use hands to finger, handle, or feel; and reach with
hands and arms. The employee frequently is required to walk; and talk
or hear. The employee is occasionally required to sit and taste or
smell. The employee must occasionally lift and/or move up to 20
pounds. Specific vision abilities required by this job include close
vision, distance vision, color vision, peripheral vision, depth
perception, and ability to adjust focus.

WORK ENVIRONMENT
The work environment characteristics described here are representative
of those an employee encounters while performing the essential
functions of this job. Reasonable accommodations may be made to enable
individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is occasionally
exposed to moving mechanical parts. The noise level in the work
environment is usually quiet.

Interested candidates kindly send your application letter and CV to:

Closing date: June 14, 2008

PT. Straits Consultancy Services is a member of Straits Asia Resources
Ltd, and focuses on providing internal services to SARL's 2 coal mine
projects in Kalimantan, Indonesia. Due to rapid expansion in our
operations, we are looking for the services of the below positions to
be placed in South Kalimantan (Sebuku project) and East Kalimantan
(Jembayan project).

MINING MANAGER (2 people)

Responsibilities:
- Achieve annual production targets by effectively managing
contractors and employees and ensuring that sufficient resources are
available to achieve the target.
- Achieve safety target of zero injuries by ensuring that risks arc
adequately assessed, controls are identify and procedures are
developed, documented and communicated to relevant contractors and
employees.
- Achieve environmental target of no significant incidents by ensuring
that operations follow all environmental requirements and minimizing
impact of operations on the environment.
- Effectively leading and managing mining personnel and contractors to
optimize production, safety, environmental and cost performance, and
building a positive work culture.
- Participates in and effectively contribute to the management of the
entire mine site in order to achieve the best possible performance of
the mine.

TECHNICAL SUPERINTENDENT (1 person)

Responsibilities:
- Supervise mine planning engineers and ensure that design for all
mining pits, dumps and accesses are completed to the required standards.
- Prepare and communicate mining and dumping schedules, mine plans and
production targets for the mining contractor and all mining personnel,
and ensure that the long term and strategic mine plans are achieved.
- Monitor all mining activities and to ensure the mine plan is achieved.
- Manage the mine geology department and ensure that coal mining meets
the required quality standards, coal recovery is maximized and that
geotechnical risk is managed with monitoring and analysis of slope
stability.
- Manage the survey department and ensure that all survey requirements
are achieved.

Requirements:
- Male and min. Bachelor (S1) of mining engineering from good
reputable university.
- Min. 4 years experience for Technical Superintendent and min. 6
years experience for Mining Manager for coal mining projects.
- Has good and strong leadership.
- Good communication in English (both writing and verbal) is a MUST.
- Has knowledge and experience in mine design, scheduling and planning
to meet production target.
- Familiar with Ms. Office, experience using Surpac or Minex
experience would be an advantage but not critical.
- Hard working, loyal, good team work.

Interested applicants please apply directly to jobstreet website or
email your detailed resume (put the applied position in your email
subject) to Visit or website at www.straitsasia.com.

(We regret that only shortlisted candidates will be notified)

TECHNIP; 6 Positions
Closing date: June 19, 2008

TECHNIP is a leading provider of Engineering, Technologies and
Construction services for oil and gas, petrochemical and other
industries; with its 22,000 people worldwide and annual revenues of
almost 7 billion euros. TECHNIP has been ranked by American
Engineering Weekly in its 2007 list of "Top 225 International
Contractors" as 1st for the World Industrial / Petroleum Market.
In Asia-Pacific, Technip has been present for more than 20 years. As
part of its expansion in Asia-Pacific, Technip established a
subsidiary in Indonesia: PT. Technip Indonesia (PTTI), which services
the Indonesian Oil and Gas, Petrochemical and General Industrial
sectors. PTTI covers offshore and onshore field development, gas
processing and liquefaction, refining and onshore pipelines. In
non-oil sectors, PTTI covers fertilizers, chemicals, cement, life
sciences, power generation and other growth market industries.

As part of our business expansion in Indonesia, we are seeking highly
qualified professionals to fill in position listed below:

PDMS Designer/Piping Designer

Job Requirements:
• Should have an Engineering DRAFTING Certification/Diploma, STM/SMA
degree or equivalent.
• Should have minimum 2-3 years of relevant working experience in
piping design in an engineering organization of oil and gas industry
for Offshore and Onshore projects, covering activities such as plot
plans, key plans, general arrangements, piping layouts, equipment/pipe
supports, isometrics, MTO, Isometrics, tie-in, etc.
• Should be computer literate, i.e. familiar with MS Office or
equivalent. Experiences in 3D software (PDS or PDMS) is a must.
• Should possess good communication skills in English language.
• Should be ready to be based in Jakarta or Balikpapan.
• Should be able to work effectively in a team and maintain good
quality of work.

Interested applicants should submit the application letter and CV to
with detailed resume and recent photograph; and
put the "PDMS Designer" on the subject email.

LEAD PROCESS ENGINEER

Job Requirements:
• Must possess minimum Bachelor degree in Chemical Engineering from a
recognized, fully accredited university in Indonesia.
• Minimum of 15 years experience in Offshore / Onshore Oil and Gas
Engineering, Design and Commissioning Support for Lead Process Engineer.
• Minimum of 7 years experience in Offshore / Onshore Oil and Gas
Engineering, Design and Commissioning Support for Senior Process Engineer.
• Shall have good written and spoken English language communication
skills.
• Shall be able to check and verify the work of junior engineers and
provide guidance as required.
• Should possess hands on experience in handling Process Engineering
softwares like HYSYS, PIPESIM etc.
• Should be able to perform process calculations and develop process
drawings with precise knowledge
• Should have analytical knowledge and report writing capabilities.
• Should be familiar with international codes and standards applicable
for Process Engineering in Oil and Gas industry
• Should have enough supervisory skill to manage a team of engineers
and drafters
• Should be able to co-ordinate with other disciplines and the client
as an effective team worker.

Interested applicants should submit the application letter and CV to
with detailed resume and recent photograph; and
put the "Lead Process Engineer" on the subject email.

SENIOR PROCESS ENGINEER

Job Requirements:
• Must possess minimum Bachelor degree in Chemical Engineering from a
recognized, fully accredited university in Indonesia.
• Minimum of 7 years experience in Offshore / Onshore Oil and Gas
Engineering, Design and Commissioning Support for Lead Process Engineer.
• Minimum of 7 years experience in Offshore / Onshore Oil and Gas
Engineering, Design and Commissioning Support for Senior Process Engineer.
• Shall have good written and spoken English language communication
skills.
• Shall be able to check and verify the work of junior engineers and
provide guidance as required.
• Should possess hands on experience in handling Process Engineering
softwares like HYSYS, PIPESIM etc.
• Should be able to perform process calculations and develop process
drawings with precise knowledge
• Should have analytical knowledge and report writing capabilities.
• Should be familiar with international codes and standards applicable
for Process Engineering in Oil and Gas industry
• Should have enough supervisory skill to manage a team of engineers
and drafters
• Should be able to co-ordinate with other disciplines and the client
as an effective team worker.

Interested applicants should submit the application letter and CV to
with detailed resume and recent photograph; and
put the "Senior Process Engineer" on the subject email.

PROCESS ENGINEER

Job Requirements:
• Must possess minimum Bachelor degree in Chemical Engineering from a
recognized, fully accredited university in Indonesia.
• Minimum of 3 years experience in Offshore / Onshore Oil and Gas
Engineering, Design and Commissioning Support.
• Shall have good written and spoken English language communication
skills.
• Should possess hands on experience in handling Process Engineering
softwares like HYSYS, PIPESIM etc.
• Should be able to perform process calculations and develop process
drawings with precise knowledge
• Should have analytical knowledge and report writing capabilities.
• Should be familiar with international codes and standards applicable
for Process Engineering in Oil and Gas industry
• Should have enough supervisory skill to manage a team of drafters
• Should be able to co-ordinate within the discipline and other
disciplines.
• Should be a fast learner and a team worker.

Interested applicants should submit the application letter and CV to
with detailed resume and recent photograph; and
put the "Process Engineer" on the subject email

QA ENGINEER

Job Requirements:
• Bachelor degree in Engineering or Science.
• Preferably qualified Lead Assessor (Recognized by Institute of QA, UK)
• Preferably, 2 years working experience in Engineering with at least
one year in the oil and gas industry.
• Posses good interpersonal and coordination skills.
• Posses good communication collaboration.
• Should be able to work effectively in a team, and maintain good
quality of work.

Interested applicants should submit the application letter and CV to
with detailed resume and recent photograph; and
put the "QA Engineer" on the subject email.

PROJECT ENGINEER –BALIKPAPAN

Job Requirements:
• Bachelor degree in Engineering or Equivalent.
• Preferably registered Professional Engineer.
• Minimum 4 years post graduate experience in Engineering with at
least 2 years in the oil and gas industry.
• Experience to handle project meeting, project filling and archiving
system.
• Ensure the proper coordination between the Engineering and
Procurement disciplines
• Ensure the technical coordination between various disciplines which
includes document distribution and correspondence.
• Should possess good communication skills.
• Should be ready to based in Balikpapan
• Should be able to work effectively in a team, and maintain good
quality of work.

Interested applicants should submit the application letter and CV to
with detailed resume and recent photograph; and
put the "Project Engineer – Balikpapan" on the subject email.

Dear Moderator

Saya Anisa dari PT. Affix Consulting, kami Executive Search. Saya,
meminta izin moderator untuk menayangkan iklan kami. Atas izin yang
diberikan saya ucapkan terima kasih.
Urgent Requirement to PMA Company

Our client is the premier comfort and proses solutions provider
company in the business of creating comprehensive solutions for all
HVAC needs in Indonesia. Our client is inviting hogh professional to
join us as :

SALES ENGINEER
(Jakarta and Surabaya)

Requirements :
Degree in Mechanical Engineering or Electrical Engineering or
Industrial Engineering.
Min. 1 or 2 years related sales experience preferably in technical
sales in HVAC industry
Candidaye with good business contacts especially HVAC industry would
be an added advantage
Resourceful, highly motivated, and able to work independently
Good communication, public relations skill, and leadership skills
Team player
Excellent spoken and written English
Send yours CV to or
Affix Consulting
Wisma Slipi 3rd Floor # 308
Jln. S Parman Kav.12
Jakarta
Phone : 021- 5305912/13 (anisa)
Fax : 021- 5307208

PT Supraco Indonesia; 10 positions
Closing date: June 16, 2008

A Jakarta based company with more than 29 years of experience in
providing services to Oil and gas industry in Indonesia.

We are seeking for best candidates to fill the vacant position of :

1. INSTRUMENT & CONTROLS ENGINEER SPECIALIST

Responsibility and Duties:
• Brings to the attention of both the DCS/Instrument Engineering any
significant concerns regarding the EPC Contractors or vendors
performance which includes quality control, schedule control and scope
of supply.
• Supervises the EPC Contractors design for the control facilities and
systems that are specifically under his responsibility.
• Communicates with other PMT instrument and control system engineers
to ensure a Provides coverage for other PMT instrumentation and
control system engineers when they re absent from the EPC Contractors
office.
• Communicates with Operating Company personnel on matters relating to
the maintenance and operation of the new facilities and their
interfaces to existing facilities.
• Performs timely review of specifications and documentation to ensure
that project schedules are maintained.
• Assist PMT in meeting RGEE expectations as required, especially RGEE
Element 2 (Risk Assessment), RGEE Element 3 (Facility Design &
Construction) and RGEE Element 7 (Management of Change).

Required Knowledge, Qualifications, Skills, and Experiences:
• Bachelor of Science in Engineering, (preferably control systems,
chemical or electrical).
• Good written and verbal communication skills.
• Good interpersonal skills.
• Familiarity with Trains 1 and 2 ICIMS Information and Control Systems.
• Technical understanding of state- of- the- art control system and
information system technology.
• Minimum of fitteen (15) years technical experience in control
systems discipline and have at least five years (5) specific
experience working with an EPC Contractor on a large capital project.
• Experience with large scale distributed control systems and
programmable electronic shutdown designs for major onshore
petrochemical facilities.
• Experience with worldwide suppliers of instrumentation, DCS and
other digital control, communications and networked subsystems.
• Experience with contractors, vendors, and implementation sub
contractors in instrumentation, communications, DCS and other digital
control and networked subsystems.
• Experience with hierarchical information and control system
structure comprised of networked digital control, shutdown and control
and information subsystems, as applied to major onshore and offshore
facilities.

2. OFFSHORE PIPELINE INSPECTOR

Responsibility and Duties:
• The offshore pipeline Inspector is responsible for technical
oversight of all pipeline and riser and expansion spool engineering,
design, fabrication, and construction on the project.
• Ensures that the contractors produce cost effective pipelines,
risers, expansion loops, and shore crossings that are designed,
fabricated and installed to meet the Projects safety, performance, and
durability requirements within the project budget and schedule.
• Participates in specification preparation and review, plus bid
preparation and review.
• Ensures that the Projects requirements are properly detailed in the
technical specification and met by the contractor, and that
deliverables comply with Contract requirements.

Required Knowledge, Qualifications, Skills, and Experiences:
• Bachelors or equivalent degree in mechanical engineering, civil, or
ocean engineering.
• 10 years + of pipeline related engineering experience in offshore
pipeline design, installation, or operations.
• Must have thorough working knowledge of principles, theories, and
concepts of pipeline engineering, design, and installation, including
application of worldwide codes, standards, and industry practices.
• Must have hands-on design experience with large diameter offshore
pipelines, including risers, sub sea spools, shore crossings,
installation, and burial.

3. COST ENGINEER

Responsibility and Duties:
• Review and monitor the Contractors performance in the areas of cost
estimating, scheduling and project control and provide input as
necessary to make certain the Companys objectives are achieved.
• Provide timely review of cost and schedule impact of changes,
modifications or alternatives by keeping abreast of engineering,
procurement and construction activities and maintain project trend and
change order logs.
• Prepare all required cost and schedule reports and provide project
cost input into Project Monthly Report.
• Prepare cost forecast to insure budget requirements are within
project expectations and keep management aware of potential budget
problems as early as possible.
• Review the contractors procedures for estimating, scheduling and
project controls and modify as necessary to meet the Companys needs.
• Assist in the preparation and review of EPC projects cost estimates
and schedules and reconciliations utilizing the Contractors systems
and personnel as required.
• Assist in the preparation of commercial terms and other
documentations for the EPC bid packages.
• Assist PMT in meeting RGEE expectation as required, especially RGEE
Element 4 (Information & Documents) and 7 (Management of Change).

Required Knowledge, Qualifications, Skills, and Experiences:
• Bachelor of Science in Engineering.
• Good written and verbal communications skills.
• Good technical/business team skills, ability to work with others.
• Minimum of fifteen (15) years of broad experience in the areas of
cost estimating, scheduling and project control and have at least five
(5) years specific involvement in projects for major process facilities.
• Experience with Contractors and worldwide suppliers, in particular
those involved in the construction of major onshore facilities.
• Experience with project control software programs such as Excel,
Word, etc.

4. INTERNAL INTERFACE COORDINATOR

Responsibility and Duties:
• Coordinating and administering regular subsurface coordination
meetings, recording meeting discussions and stewarding follow up actions.
• Coordinating information to independent consultants and other
support to Pertamina financing.
• Developing the projects Interface Management Plan with which each
EPC contractor will be required to comply.

Required Knowledge, Qualifications, Skills, and Experiences:
• Bachelors or equivalent degree in engineering.
• 10 years + of broad upstream oil and gas experience. Previous
experience as a project engineer preferred. Experience in written
management communication.

5. EXECUTION PLANNING SPECIALIST

Responsibility and Duties:
• Participation in developing and coordinating execution project plan.
• Engages experts required in project management such SHE, regulatory,
quality and cost schedule development as needed.
• Involved in developing and coordinating overall execution plans with
particular responsibility to organization planning, important items,
interface management, lessons learned and management of change elements.
• Assist and support Project Execution Lead to apply project control
systems to identify the progress and monitor trends.
• Responsible to ensure that project controls are effectively
implemented during the project.

Required Knowledge, Qualifications, Skills, and Experiences:
• Degree in Technique (BS/MS).
• Broad experience in management project and business control.
• Leadership and personnel management skill.
• Strong personality to effectively interact with stakeholders,
including co-ventures and local government institutions.
• Expected can be positioned as Project Planning and Controls
Supervisor of, Project Advisor.
• Competency Project Management (e.g. Cost estimation, project
control, execution planning, contract, planning and scheduling).
• Basic ability in construction and development planning.
• Previous experience for more than one (marine, facilities, sub sea,
pipelines, structures, etc.).
• 3 years experience in different project management areas.

6. RESERVOIR ENGINEER

Responsibility and Duties:
• To conduct and direct studies on reservoir to determine optimum
development scheme.
• To recommend and assist in collection of reservoir data needed for
reservoir management and new projects to enhance gas deliverability.
• To report on reservoir performance both historical and predicted to
government agencies and Management.
• To train local engineers in advance reservoir engineering techniques.
• To provide quality reservoir engineering expertise and advice to
affiliate management.
• To recommend and implement data acquisition programs, identify and
solve reservoir engineering problem.

Required Knowledge, Qualifications, Skills, and Experiences:
• BS degree in an engineering subject with specialized course in
Reservoir Engineering.
• 10 years of broad engineering experience with not less than seven
years in Reservoir Engineering.
• Experience of simulation and detailed knowledge of economics.
• General computer experience.

7. GENERAL INSPECTION & SURVEILLANCE (GIS) COORDINATOR

Responsibility and Duties:
• Develop and maintain the Project Assessment/Audit Plan for
endorsement and approval by the Project Quality Manager and the Senior
Project Manager respectively.
• Prepare auditor qualification processes for Project Quality Manager
approval, and prepare and maintain auditor qualification packages for
Lead and Auditor personnel.
• Participate in assessments or audits as required; Perform Lead
Auditor responsibilities on supplier audits when participating.
• Coordinate the execution of Procurement Inspection when this
activity remains a Company responsibility.
• Coordinate surveillance of contractors supplier management and shop
inspection activities.
• Interface with the MIGAS Inspection Coordinator to provide
inspection support when required.

Required Knowledge, Qualifications, Skills, and Experiences:
• BS/S1 in engineering is preferred, or an extensive degree of
technical training and experience.
• Formal technical, quality assurance and auditor/assessor training is
preferred.
• Minimum of 10 years experience in Engineering, Construction,
Commissioning, Start-up or Operation activities of various facilities
in the Oil and Gas Industry.
• of various facilities in the Oil and Gas Industry.
• Regional experience with contractors, in particular those involved
in the construction of onshore production facilities, pipelines and/or
FSOs, Lis appropriate.
• High level of construction knowledge, skill and experience.
• Computer proficiency with Project applications.

8. SHE&S COORDINATOR

Required Knowledge, Qualifications, Skills, and Experiences:
• University or College degree Preferred.
• High Level of construction knowledge, skill experience.
• 10-15 years experience in implementing SHE / Security Management
Systems.
• 5 years project healt & safety experience.
• Good computer skills including Lotus Notes, Microsoft Excel, Word
and Powerpoint.

9. EXTERNAL INTERFACE COODINATOR

Required Knowledge, Qualifications, Skills, and Experiences:
• 5 years of Procurement experiences.
• Intermediate to Expert Contracting Skills.
• Experience in Construction, Maintenance, Drilling or Production
Service Contracting.
• Detailed knowledge and application of ExxonMobil requirements (e.g.
DOAG).
• Strong analytical, negotiation and communication skills.
• BA/BS Preferred.
• Upstream experience would be very beneficial but not required.

10. CPF SPECIALIST

Responsibility and Duties:
• Ensure negotiation of land values is within the "Terms of Reference"
(TOR) approved in Terms Sheets.
• Responsible for communication and status documents for field
activities to be sent to Jakarta Office.
• Prepare and maintain activity schedules.
• Prepare Minutes of Meetings (MOM) to accurately capture discussion
items at Negotiation events and other significant meetings in the field.
• Identify and assist to resolve gaps in work activities or
communication information.
• Communicate With Methods & Procedures Specialist regarding
Compensation Guidelines & Procedures, Term Sheets and Best Practices.
• Coordinate, between Jakarta Rice personnel and Negotiation Team(s).

Required Knowledge, Qualifications, Skills, and Experiences:
• Effective interpersonal skills.
• Proactively identify and communicate or resolve work activities.
• Oral and written communication skills.
• Time management skills.
• Self motivated with the ability to work with minimal supervision.

Sent application with code CM to All Position.

HR – Recruitment
PT. Supraco Indonesia
Gd. Radiant Utama
Jl. Kapten Tendean 24
Jakarta
Or e-mail :

Closing date: June 16, 2008

A reputable oil, gas engineering company immediately needs:
HRD and Accounting/Finance Manager

To qualify, she/he must have following qualifications:

1. S1 degree from reputable university with minimum GPA of 2.75.
2. Minimum of 5 years experience in the same field.
3. Maximum age 35 years

Please send your CV to:

PT Karinda Sumber Daya
Jl. Prof. Dr. Soepomo SH No. 42
Jakarta Selatan
Or email to :