Job Category: Senior

Dear All,
We are KABURO Recruitments, a management executive search and recruitment specialist firm located in South Jakarta. 
we are currently recruiting on behalf of one of our clients,  which has open vacancies for temporary Junior Secretary to help support the secretarial and administrative work of a Senior Director in the company. This position will be for approximately four (4) months, and may be extended upon the need.
 
The applicant would preferable having:
·       Bachelor degree or D3 from LPK-Tarakanita or any other secretarial college
·       Minimum 2 years experience in secretarial works preferably for HR Director, and be familiar with standard HR functions.
·       Fluent in English, both oral and written
·       Good Computer skills
 
If you are interested and meet the requirements above, please do not hesitate to send your application letter, CV, and recent photograph to:


  
Thank you
   K a b u r o   Recruitment
 
"The lighthouse for your Career Search
"

For further info email to
For job seeker email CV to

Follow us at https://twitter.com/kaburodotcom

Dear All,
We are KABURO Recruitments, a management executive search and recruitment specialist firm located in South Jakarta. 
we are currently recruiting on behalf of one of our clients,  which has open vacancies for temporary Junior Secretary to help support the secretarial and administrative work of a Senior Director in the company. This position will be for approximately four (4) months, and may be extended upon the need.
 
The applicant would preferable having:
·       Bachelor degree or D3 from LPK-Tarakanita or any other secretarial college
·       Minimum 2 years experience in secretarial works preferably for HR Director, and be familiar with standard HR functions.
·       Fluent in English, both oral and written
·       Good Computer skills
 
If you are interested and meet the requirements above, please do not hesitate to send your application letter, CV, and recent photograph to:


  
Thank you
   K a b u r o   Recruitment
 
"The lighthouse for your Career Search
"

For further info email to
For job seeker email CV to

Follow us at https://twitter.com/kaburodotcom

We are urgently seeking some professional and well experienced
technicians with a good background in the Ceramic Industry to work in
Jeddah, KSA with the following position as:



Department : Quality Control

Position : QC Supervisor

Number : 1 person

Qualification : Diploma Degree, majoring
in Chemical or Geology Engineering

Experience : Min. 5 years

Field of Experience : Ceramic Industry

Duties & Responsibilities : Implementation of Quality plan

- Control incoming material

- Control whole process

- Control all output ( Finished goods)

- Follow-up customer complain and take corrective and
preventive action

- Organize the work of his subordinate staff in the best way to
ensure that the Process is running according to Quality Standards and
final product is conform to the norm

- Liaise with other departments and get timely feed back to
prevent any problems

- Prospecting for alternative materials to improve the quality
and enhance the Productivity and strive with his team to reach Quality
and Productivity Targets

- Work contentiously on reducing production cost while
improving the quality

- Timely analysis of all production data and give respective
feed back to all concerned sections in order to improve production
process.

- Up date and standardize all equipment and machinery that is
used at QC and production departments

- To ensure that strict control measures are taken within each
department

- Set up a standard fro all processes and for company
productions according to Production program.

- Follow up and control any incoming material from new
suppliers to make sure that it is conform to the required
specifications Issue daily department activity reports to Plant Manager.





Department : Quality Control

Position : QC Shift Leader

Number : 3 people

Qualification : Diploma Degree, majoring
in Chemical or Geology Engineering

Experience : Min. 4 years

Field of Experience : Ceramic Industry

Duties & Responsibilities : Follow up all instructions from
direct Supervisor

- Control all incoming materials

- Control complete production process and provide feed back to
Department Head

- Control all output (Finished goods) to ensure that Shade and
Caliber … are conforming to the norm.

- Follow up customer complain and take corrective and
preventive measures in close collaboration with Department Head

- Organize the work within his shift to ensure that complete
process is as per the company standards and final product is in
conformity with the norm

- To ensure that all materials used in the production are
conform to the norm and to the quality standards.





Department : Quality Control

Position : QC Technician

Number : 3 people

Qualification : Diploma Degree,
Technical Studies

Experience : Min. 2 years

Field of Experience : Ceramic Industry

Duties & Responsibilities : Follow up all instructions from
QC Shift Leader

- Control whole production process and provide a timely feed
back to the Department

- Control output quality ( finished good): Shade, Caliber
…





Department : Production

Position : Material Controller

Number : 1 Person

Qualification : Diploma Degree,
Technical Studies (Geologist)

Experience : Min. 3 years

Field of Experience : Ceramic Industry

Duties & Responsibilities : Follow up all instructions from
QC Supervisor

- Control all Body raw materials to ensure that they are
conform to the specifications and norms

- Control all imported raw materials to ensure that they are
conform to the specifications and norms

- Control body formula and ensure that all raw materials are
within company quality standards

- Follow up the receiving of all raw materials shipments and
control their use throughout the production process to guarantee the
stability for the quality

- Prospecting for new Suppliers and alternative materials that
offer quality and price advantages

- Working to minimize the cost and improve the quality

- Analyze all output and marked feed back to detect any
defects in the final

- Product and help solving any problems to make sure they are
conform to the required specification

- Lab testing and approval of alternative samples from new
suppliers and authorizing new materials to be included in the glaze
formulas

- Detect any changes in the specifications of the glaze
materials and prevent any





Department : Laboratory

Position : R&D Lab Supervisor

Number : 1 person

Qualification : Diploma Degree, majoring
in Chemical or Geology Engineering

Experience : Min. 5 years

Field of Experience : Ceramic Industry

Duties & Responsibilities : Work to improve our technology
and decoration

- Analyze market feed back and search for new marketing ideas

- Work closely with External Technicians to implement new ideas
in the factory and develop new marketing ideas using new materials.

- Provide all data and support to production line during
change models and shade confirmations

- Distribute and organize the work between the Lab technicians
according the products types and typologies ( Wall tiles, Floor tiles,
Porcelain )

- Focus on any market feed back directly from the clients or
through the marketing department

- Coordinate with the production to solve any production
problems relating to decoration and applications.

- Submit Daily activity reports to Plant Manager





Department : Production

Position : Assistant Production
Manager

Number : 3 People

Qualification : Master Degree, majoring
Engineering

Experience : Min. 5 years

Field of Experience : Working in Glazing lines

Duties & Responsibilities : Follow Plant Manager
's
instructions

- Work on achieving factory targets both on the level of
productivity and quality

- Set up the best organization of the work among all Shift
Leaders to ensure that each department is performing according to the
Quality Standards and undertakes the necessary control measures as per
the policies and procedures.

- Organize the flow of work of the mechanical and electrical
maintenance teams to ensure that all machinery in the factory is
permanently working in good condition.

- Ensure that the production is running according to the
Production Program and ensure that models changes and shades
confirmations are conducted smoothly and according to the standards.

- Working to minimize the cost by reducing the percentage of
the rejected tiles and improve qulity and reduce the production
down-time.

- Follow up the complete production process and adopt the
necessary corrective and preventive action to solve any problems.

- Submit daily activity reports to Production Manager





Department : Maintenance

Position : Mechanical Maintenance
Supervisor

Number : 1 Person

Qualification : Diploma Degree, majoring
in Mechanical Engineering

Experience : Min. 5 years

Field of Experience : Ceramic Field

Duties & Responsibilities : Set-up mechanical preventive
planning

- Review all spare parts stocks

- Work closely with external technicians during installation of
machinery, commissioning and start up of new projects

- Distribute the work among his team according to the
priorities and the job requests

- Working to minimize production down-time all stages of
production process

- Working to improve the quality and the productivity and to
achieve the preset targets.

- Striving to minimize the cost by decreasing spare parts
consumption

- Good negotiation skills with new spare parts suppliers

- Submit daily activity report to Plant Manager





Department : Technical Office

Position : Technical Office
Engineer

Number : 1 Person

Qualification : Master Degree, majoring
in Electrical & Mechanical Engineering

Experience : Min. 5 years

Field of Experience : Ceramic Field

Duties & Responsibilities : Follow the instructions of the
Technical Office Supervisor

- Work to assist all departments to improve Performance
throughout the whole production process

- Follow up job request from any department

- Follow the all external technicians and ensure that their
missions are fulfilled within the shortest time

- Follow up all Purchasing Requests with the Purchasing
department to ensure that the requested parts and materials are
delivered with no delay and according the required specifications.

- Review spare parts stocks and work on reducing the volume of
the non moving items

- Striving to reduce the cost and prospecting for new
suppliers for different sorts of spare parts.





Department : Production

Position : Machine Operator

Number : 24 People

Qualification : Senior high school,
basic technical background

Experience : Min. 2 years

Field of Experience : Ceramic Field or similar
Industry

Duties & Responsibilities : General Machine Operating

- General Maintenance and machine uptake works

- General Production works





Department : Production
Position : Production Master
Planner

Number : ~

Qualification : BA or Higher Diploma
Degree in Material Management, Business Studies, MRP & ERP

Experience : Min. 5 years

Field of Experience : Ceramic Field or similar
Industry

Duties & Responsibilities : Ensuring Collaboration with
Production and Sales Department for preparation of Production Schedule

- Follow up and monitor all production orders from raw material
stage till ethe receiving of the goods at the warehouse

- Analyze raw material requirements for production orders

- Organize sales forecast and adjust production schedule
accordingly

- Monitor Stock movements and report to Production and Sales
Departments

- Follow inventory aging and reporting to sales departments for
exclusive items

- Recommending changes and improvements in production
environment by proposing ideas

- Create production orders in the ERP system

- Confirming the proper consumption of Raw materials with the
concerned departments

- Closing Production orders in production floor and reporting
to cost accountant

- Control the wastage from production and report it in material
reconciliation

- Prepare monthly report on material reconciliation

- Monitor forecast/master plan and production schedule

- Assist in stock inventory and annual stock take



General Skills Required:
1. Male, Age between 23 – 40 years old.

2. Must have excellent spoken and written in English.

3. A self starter, energetic, good personality, highly motivated
and inspirational

4. Have excellent communication skills

5. Ability to work independently and good team work.

6. Have permission from family



CV Format:

1. Personal data: complete name, place and date of birth, marital
status, height/weight, passport id and valid date (if you have)

2. Education: university/academy name, period, majoring in

3. Experience: company name, department, job title, period,
salary, detail job descriptions, reference name, position and telephone
number.

4. Training: Provider events, place and period date.


Requirements for Document (3 copies) :

1. Copy of ID Card (KTP)

2. Copy of Passport (valid until 1 year)

3. Copy Degree Certificate

4. Colour Photograph 3x4 2 pages.

5. Colour Photograph 4x6 4 pages.

6. Original and copy legalized of Permission letter from family
signed on stamp (di atas materai) and legalized by Civil Department
(Kelurahan)

7. Copy of Employment Certificate



Please send your complete Application with put your position applied at
the earliest before March 26, 2010 to:

HRD & GA Division

PT Millenium Muda Mandiri

Menara Hijau, 14th Floor, Jl. MT Haryono Kav. 33, Jakarta 12770

Tel.: +62 21 7987533

Fax.: +62 21 79198832


<http://groups.yahoo.com/joboverseas_groups/post?postID=aFx3I8v_buDKjx4I

g34XTPkqmp16R3Ep6eLA6sV-kFf3kQm-EnSa-YBLZiH-CYp-tLMcGfkh1fvRgJdA1llBRx8h

pBzAQQ> ,
<http://groups.yahoo.com/joboverseas_groups/post?postID=feld7HskKV26yfG2

KbtFqu0xP-WXe37qaPjYu1NHTOdh99YxeCTucsISl2L9FGsrywWqvqfNAzAHRJ-cHRtI0c3h

vIPkK0U6tT0> ,
<http://groups.yahoo.com/joboverseas_groups/post?postID=BB9xy7-1CL_XDUR1

9CogQrMnaJQvQEopRUY4qBPbYudxqapO3OAXBRQbz3mFSt0VoCjuol078yOVlbi5HmPw>
www.milleniummudamandiri.com <http://www.milleniummudamandiri.com/>

We are urgently seeking some professional and well experienced
technicians with a good background in the Ceramic Industry to work in
KSA with the following position as:



Department : Quality Control

Position : QC Supervisor

Number : 1 person

Qualification : Diploma Degree, majoring in Chemical
or Geology Engineering

Experience : Min. 5 years

Field of Experience : Ceramic Industry

Duties & Responsibilities : Implementation of Quality plan

- Control incoming material

- Control whole process

- Control all output ( Finished goods)

- Follow-up customer complain and take corrective and
preventive action

- Organize the work of his subordinate staff in the best way to
ensure that the Process is running according to Quality Standards and
final product is conform to the norm

- Liaise with other departments and get timely feed back to
prevent any problems

- Prospecting for alternative materials to improve the quality
and enhance the Productivity and strive with his team to reach Quality
and Productivity Targets

- Work contentiously on reducing production cost while
improving the quality

- Timely analysis of all production data and give respective
feed back to all concerned sections in order to improve production
process.

- Up date and standardize all equipment and machinery that is
used at QC and production departments

- To ensure that strict control measures are taken within each
department

- Set up a standard fro all processes and for company
productions according to Production program.

- Follow up and control any incoming material from new
suppliers to make sure that it is conform to the required specifications
Issue daily department activity reports to Plant Manager.





Department : Quality Control

Position : QC Shift Leader

Number : 3 people

Qualification : Diploma Degree, majoring in Chemical
or Geology Engineering

Experience : Min. 4 years

Field of Experience : Ceramic Industry

Duties & Responsibilities : Follow up all instructions from direct
Supervisor

- Control all incoming materials

- Control complete production process and provide feed back to
Department Head

- Control all output (Finished goods) to ensure that Shade and
Caliber … are conforming to the norm.

- Follow up customer complain and take corrective and
preventive measures in close collaboration with Department Head

- Organize the work within his shift to ensure that complete
process is as per the company standards and final product is in
conformity with the norm

- To ensure that all materials used in the production are
conform to the norm and to the quality standards.





Department : Quality Control

Position : QC Technician

Number : 3 people

Qualification : Diploma Degree, Technical Studies

Experience : Min. 2 years

Field of Experience : Ceramic Industry

Duties & Responsibilities : Follow up all instructions from QC Shift
Leader

- Control whole production process and provide a timely feed
back to the Department

- Control output quality ( finished good): Shade, Caliber …





Department : Production

Position : Material Controller

Number : 1 Person

Qualification : Diploma Degree, Technical Studies
(Geologist)

Experience : Min. 3 years

Field of Experience : Ceramic Industry

Duties & Responsibilities : Follow up all instructions from QC
Supervisor

- Control all Body raw materials to ensure that they are
conform to the specifications and norms

- Control all imported raw materials to ensure that they are
conform to the specifications and norms

- Control body formula and ensure that all raw materials are
within company quality standards

- Follow up the receiving of all raw materials shipments and
control their use throughout the production process to guarantee the
stability for the quality

- Prospecting for new Suppliers and alternative materials that
offer quality and price advantages

- Working to minimize the cost and improve the quality

- Analyze all output and marked feed back to detect any defects
in the final

- Product and help solving any problems to make sure they are
conform to the required specification

- Lab testing and approval of alternative samples from new
suppliers and authorizing new materials to be included in the glaze
formulas

- Detect any changes in the specifications of the glaze
materials and prevent any





Department : Laboratory

Position : R&D Lab Supervisor

Number : 1 person

Qualification : Diploma Degree, majoring in Chemical
or Geology Engineering

Experience : Min. 5 years

Field of Experience : Ceramic Industry

Duties & Responsibilities : Work to improve our technology and
decoration

- Analyze market feed back and search for new marketing ideas

- Work closely with External Technicians to implement new ideas
in the factory and develop new marketing ideas using new materials.

- Provide all data and support to production line during change
models and shade confirmations

- Distribute and organize the work between the Lab technicians
according the products types and typologies ( Wall tiles, Floor tiles,
Porcelain )

- Focus on any market feed back directly from the clients or
through the marketing department

- Coordinate with the production to solve any production
problems relating to decoration and applications.

- Submit Daily activity reports to Plant Manager





Department : Production

Position : Assistant Production Manager

Number : 3 People

Qualification : Master Degree, majoring Engineering

Experience : Min. 5 years

Field of Experience : Working in Glazing lines

Duties & Responsibilities : Follow Plant Manager
's instructions

- Work on achieving factory targets both on the level of
productivity and quality

- Set up the best organization of the work among all Shift
Leaders to ensure that each department is performing according to the
Quality Standards and undertakes the necessary control measures as per
the policies and procedures.

- Organize the flow of work of the mechanical and electrical
maintenance teams to ensure that all machinery in the factory is
permanently working in good condition.

- Ensure that the production is running according to the
Production Program and ensure that models changes and shades
confirmations are conducted smoothly and according to the standards.

- Working to minimize the cost by reducing the percentage of
the rejected tiles and improve qulity and reduce the production
down-time.

- Follow up the complete production process and adopt the
necessary corrective and preventive action to solve any problems.

- Submit daily activity reports to Production Manager





Department : Maintenance

Position : Mechanical Maintenance Supervisor

Number : 1 Person

Qualification : Diploma Degree, majoring in
Mechanical Engineering

Experience : Min. 5 years

Field of Experience : Ceramic Field

Duties & Responsibilities : Set-up mechanical preventive planning

- Review all spare parts stocks

- Work closely with external technicians during installation of
machinery, commissioning and start up of new projects

- Distribute the work among his team according to the
priorities and the job requests

- Working to minimize production down-time all stages of
production process

- Working to improve the quality and the productivity and to
achieve the preset targets.

- Striving to minimize the cost by decreasing spare parts
consumption

- Good negotiation skills with new spare parts suppliers

- Submit daily activity report to Plant Manager





Department : Technical Office

Position : Technical Office Engineer

Number : 1 Person

Qualification : Master Degree, majoring in
Electrical & Mechanical Engineering

Experience : Min. 5 years

Field of Experience : Ceramic Field

Duties & Responsibilities : Follow the instructions of the Technical
Office Supervisor

- Work to assist all departments to improve Performance
throughout the whole production process

- Follow up job request from any department

- Follow the all external technicians and ensure that their
missions are fulfilled within the shortest time

- Follow up all Purchasing Requests with the Purchasing
department to ensure that the requested parts and materials are
delivered with no delay and according the required specifications.

- Review spare parts stocks and work on reducing the volume of
the non moving items

- Striving to reduce the cost and prospecting for new suppliers
for different sorts of spare parts.





Department : Production

Position : Machine Operator

Number : 24 People

Qualification : Senior high school, basic technical
background

Experience : Min. 2 years

Field of Experience : Ceramic Field or similar Industry

Duties & Responsibilities : General Machine Operating

- General Maintenance and machine uptake works

- General Production works





Department : Production

Position : Production Master Planner

Number : ~

Qualification : BA or Higher Diploma Degree in
Material Management, Business Studies, MRP & ERP

Experience : Min. 5 years

Field of Experience : Ceramic Field or similar Industry

Duties & Responsibilities : Ensuring Collaboration with Production and
Sales Department for preparation of Production Schedule

- Follow up and monitor all production orders from raw material
stage till ethe receiving of the goods at the warehouse

- Analyze raw material requirements for production orders

- Organize sales forecast and adjust production schedule
accordingly

- Monitor Stock movements and report to Production and Sales
Departments

- Follow inventory aging and reporting to sales departments for
exclusive items

- Recommending changes and improvements in production
environment by proposing ideas

- Create production orders in the ERP system

- Confirming the proper consumption of Raw materials with the
concerned departments

- Closing Production orders in production floor and reporting
to cost accountant

- Control the wastage from production and report it in material
reconciliation

- Prepare monthly report on material reconciliation

- Monitor forecast/master plan and production schedule

- Assist in stock inventory and annual stock take





General Skills Required:

1. Male, Age between 23 – 40 years old.

2. Must have excellent spoken and written in English.

3. A self starter, energetic, good personality, highly motivated
and inspirational

4. Have excellent communication skills

5. Ability to work independently and good team work.

6. Have permission from family



CV Format:

1. Personal data: complete name, place and date of birth, marital
status, height/weight, passport id and valid date (if you have)

2. Education: university/academy name, period, majoring in

3. Experience: company name, department, job title, period, salary,
detail job descriptions, reference name, position and telephone number.

4. Training: Provider events, place and period date.



Requirements for Document (3 copies) :

1. Copy of ID Card (KTP)

2. Copy of Passport (valid until 1 year)

3. Copy Degree Certificate

4. Colour Photograph 3x4 2 pages.

5. Colour Photograph 4x6 4 pages.

6. Original and copy legalized of Permission letter from family
signed on stamp (di atas materai) and legalized by Civil Department
(Kelurahan)

7. Copy of Employment Certificate





Please send your complete Application with put your position applied at
the earliest to:



HRD & GA Division

PT Millenium Muda Mandiri

Menara Hijau, 14th Floor, Jl. MT Haryono Kav. 33, Jakarta 12770

Tel.: +62 21 7987533

Fax.: +62 21 79198832

>
,
> ,
>
www.milleniummudamandiri.com <http://www.milleniummudamandiri.com/>

A famous Japan electric company urgently seeks Eengineers for their
Bahrain office:



1. Project Engineers 2 persons

2. Operator Training Simulator (OTS) Engineers 2 persons

3. Senior Emergency Shutdown (ESD) Engineers 1 Person

4. SCADA Service Engineers 6 persons

5. Analyzer Engineers 3 persons

6. Field Instrument Engineers 2 persons

7. PIMS/APC 3 persons





Job Descriptions:

1. PROJECT ENGINEERS

1. A degree or Diploma in Engineering Field, preferably in
Instrumentation or Electronics or Electrical.
2. Minimum 3 years experiences in the field of Instrumentation and
Control System field.
3. Perform the project detailed engineering, design, assembly and
testing team of various Control Systems as per the Project specification
requirements



2. OPERATOR TRAINING SIMULATOR (OTS) ENGINEERS

1. A degree in Chemical Engineering
2. Minimum 3 years experience in the dynamic simulation of oil & gas,
refinery and chemical processes
3. Experience of Operator Training Simulator and dynamic process
simulation studies.
4. Exposure to different Simulation Software used such as
Shadowplant, HYSYS, Dynamism, Aspen plus, Pro II



3. SENIOR EMERGENCY SHUTDOWN (ESD) ENGINEERS

a. A degree in B.E.-Instrumentation or Electrical and Electronics

b. Experience as Sr. ESD Engineer with 7 to 10 years in the ESD Field

c. Engineering documentation conforming to quality practices &
procedure

d. Performing detailed System and Application Software Engineering,
design, assembly and testing of the control system as per the customer
requirements.



4. SCADA Service Engineer – As attached

Division: Technical Support Department

Qualification and Experience

· Basic Qualification – Bachelor of Engineering in
Instrumentation or Electronics

· Minimum 3 years experience in process industries-preferably
Oil & Gas/Petrochemical

· Should have worked as Project/Service engineer on at least
medium-sized SCADA project.

· Installation and commissioning Experience is preferable

· Good communication and inter-personal skills

· Thorough knowledge of standards and practices used in the
industry.

Experience on SCADA projects involving responsibility of multi-vendor
systems

Job Purpose

· To provide assigned customers with field support on SCADA
systems.

· This involves extensive travel throughout the assigned
country and to other countries within the Middle East.

· Individuals must be able to work independently at customer
sites in providing technical resolutions.

Key Responsibilities & Accountabilities

· To provide technical assistance and maintain SCADA systems
at customer sites

· To provide the customer with installation and start up
assistance

· To perform administrative duties related to service calls

Specific duties

· Troubleshoots problems on customer systems.

· Corrects problems and repairs as necessary.

· Carries out preventive maintenance work on assigned service
contracts

· Advises customer on site preparation and layout prior to
installation

· Supervises system installation

· Performs system start up operations

· Assists customers in the commissioning of processes

· Modifies configuration and updates relevant documentation

· Provides 24 hour service when on call

· Repairs, configures, calibrates, stages and troubleshoots
on systems in-house as required

· Reports activities, times, materials and expenses in
accordance with requirements

· Performs any other related duties as required.

Competencies

· Proficient in SCADA software and PLC based system

· Basic knowledge of FF (Foundation Fieldbus) including
trouble-shooting and installation

· Basic understanding of Microsoft/ Unix Operating system is
desirable

· Basic Networking knowledge including third-party interfaces

Skills

· Sound fundamentals of process control technology

· In-depth knowledge of SCADA systems, preferably Yokogawa
and third-party interface.

· Knowledge of IT, Networking basics and Microsoft
Applications.

· Progress Reporting and Presentation skills.

· Project Management and Organizational Skills to handle
Multiple issues

· Strong Communication and Leadership Skills

· A team player with pleasant people skills.



5. Analyzer Engineer:

a. Candidates should be B.E. Or B. Tech. Degree qualified,
specialized in Electronics/Instrumentation/Chemical Engineering

b. Minimum 3 years experience in the design, engineering, startup,
commissioning, maintenance and training on a diverse range of analyzers,
and Process Gas Chromatographs in the Oil & Gas, Petrochemical industry.

c. Must be fully conversant with the process applications, and able
to design appropriate sampling systems, Trouble-shoot and resolve
complex problems.



6. Field Instrumentation Engineer:

a. Candidates should be B.E. Or B. Tech. Degree-qualified,
specialized in Electronics/Instrumentation

b. Minimum 5 years experience in the design, startup, commissioning,
service and training on Field Instruments (FF & Hybrid) used in the Oil
& Gas, Petrochemical industry.

c. Should be well-versed with all kinds of flow-meters, pressure and
level transmitters with hands-on experience on sizing calculations,
design and trouble-shooting, and adept in communication protocols.



7. APC/PIMS:

a. Candidate should be specialized chemical engineer

b. Around 5 yrs experience in implementation of APC application hands
on experience.

c. Should have worked on SMOC & RQE software.

d. For PIMS must have quantum & Pi system knowledge and hands on
experience.



The above campaign is planned for interview on 3rd week of March.



Interested applicants are invited to submit detailed resume (CV) stating
personal particulars, employment history, qualifications in English not
latest by March 16, 2010 to the following e-mail address :
%20> in MS Word not
more than 300kb.



Please write
"your position code
" on your application title.

Application with PDF or other format and exceeding more than 300KB will
not be considered.



For more info
's, please call us or click
http://www.totaldata.co.id/jobsite_bahrain_yokogawa.htm
<http://www.totaldata.co.id/jobsite_bahrain_yokogawa.htm>

PT. Totaldata Persada

021-8477689, 021-84994728. Attn.: Ms. Eva



Thanks Mr. Admin.

Due to continued expansion, an advanced technology equipment and services company is looking to recruit a Senior Project Manager.

In this role you will integrate and develop processes that fulfil the business needs and manage complex issues.

The successful candidate will hold a masters degree in Information Systems, Computer Science or Engineering with more than 8 years experience in engineering program management. Six Sigma Black Belt certification is desirable but not essential.


If you have the drive to succeed in this role, then please forward your resume to or call Fiola Browne on 713 430 2230 for an informal discussion

Our Client, Adcom Dua Dua (www.adcomduadua.com), an integrated
communication firm is seeking people to fill in position with following
experiences and skills :





Public Relation Specialist (PRS - ADC)



Responsibilities :

. The Public Relations Specialist will play a key role, supporting
the Company
's goal.

. Working with senior management, he/she will work on various
initiatives to drive strategic PR campaigns through tactical, comprehensive
and measurable programs.

. Create and present PR strategies to Client with tactical programs
that deliver measurable results

. Write and edit press materials such as press releases, pitches,
briefing sheets, plans, press kit materials, source and brief testimonials
and case studies

. Write and edit messaging and Q&A around announcements/events

. Work with a wide variety of clients to deliver on company goals
and strategies

. Work with contractors and virtual team members.

. Other task as needed



Requirement :

. Highly developed communication skills (verbal, written,
presentation)

. Strategic thinking and ability to execute at all levels

. Proactively identify communications/newsworthy opportunities and
develop supporting programs

. Ability to influence and provide strategic and persuasive counsel
to clients

. A self-starter, detail-oriented, highly organized and able to
manage multiple tasks/projects simultaneously with a sense of urgency

. Thrive in a fast-paced, unstructured environment; work
independently with minimal supervision; adapt easily to new situations

. Work directly with media at all levels

. PR agency experience a plus

. Minimum 1+ years PR experience. Agency experience desired with
consumer technology/product expertise preferred







Interested candidates are requested to send in their complete CV as an
attachment in MS Word Format only in English with current & expected salary
and recent photograph to :





Please put the position applied PRS - ADC on the subject line.

Only short listed candidates will be notified.

If you wish to view our client vacancy, kindly join our mailing list & visit
our website at www.sintesa-resourcing.com

Due to continued expansion, an advanced technology equipment and services company is looking to recruit a Senior Engineer for Subsea Wellhead Equipment.

In this role you will integrate and develop processes that fulfil the business needs and be involved in long-term planning.


The successful candidate will hold a degree in Mechanical Engineering with more than 10 years experience in the design and engineering of API 6A Surface Wellhead equipment.

If you have the drive to succeed in this role, then please forward your resume to or call Fiola Browne on 713 430 2230 for an informal discussion.

1. DAY SHIFT TECHNICIAN MAIN SUBSTATION

2. DRP DAY SHIFT SENIOR ELECTRICAL TECHNICIAN

3. DRP SHIFT SENIOR INSTRUMENTATION TECHNICIAN

4. ENGINEER CONTROL AND AUTOMATION DRP

5. ENGINEER ELECTRICAL CRANES

6. ENGINEER ELECTRICAL MAINTENANCE SUBSTATION

7. ENGINEER LEVEL 2 AUTOMATION SMP

8. HEAD OF ELECTRICAL AND AUTOMATION - DRP MT

9. HEAD OF ELECTRICAL AND AUTOMATION - SMP MT

10. RM2 SHIFT ELECTRICAL TECHNICIAN

11. RM3 DAY SHIFT SENIOR ELECTRICAL TECHNICIAN

12. SMP DAY SHIFT SENIOR ELECTRICAL TECHNICIAN



1. DAY SHIFT TECHNICIAN MAIN SUBSTATION





Department : Electrical and Automation Maintenance

No. Of Vacancy : 2

Salary : 2462 – 2900 / month



The desired candidate must have a minimum of 2 years working experience
in a related field, and must have knowledge in the following:

a. Works to Safety Rules and regulations, instrumentation maintenance
work inspection reports & work orders

b. Analysis of previous day & shift activities with Supervisor

c. Guide, monitor and assists train new team members

d. Personally provide technical input to the resolution of major
maintenance problems

e. Assist Supervisor in ensuring proper spare parts management

f. Knowledge of maintenance of EHV, HV and LV equipments

g. Experience with repairs and maintenance of substation equipments

h. Familiar with basic office computer software



Also, Diploma / Trade Certificate (ITI) in Electrical / Electronic
Engineering is a must.



Personally provide technical input to the resolution of major
maintenance problems

Works to Safety Rules and regulations, instrumentation maintenance work
inspection reports and work orders





2. DRP DAY SHIFT SENIOR ELECTRICAL TECHNICIAN





Department : Electrical and Automation Maintenance

No. Of Vacancy : 2

Salary : US$ 3158 – 3355 / month



The desired candidate must have a minimum of 5 years experience in the
following:

a. Work Planning: Works to Safety Rules and regulations, electrical
maintenance work inspection reports & work orders

b. Analysis and Reporting: Analysis of previous day & shift
activities with Supervisor

c. Team supervision: Guide, monitor and assists train new team
members

d. Problem Solving: Personally provide technical input to the
resolution of major maintenance problems

e. Spare parts management: Assist Supervisor in ensuring proper spare
parts management

f. Fully conversant with HYL Direct Reduction process

g. Fair knowledge of Level 1 Automation systems related to DRP
process

h. Experience on maintenance of processing equipment (Medium Voltage
Substations, Transformers, Switchgears, PLCs, Drives, Motors etc.)

i. Familiar with basic office computer software



Also, Diploma / Trade Certificate (ITI) in Electrical / Electronic
Engineering is a must.





3. DRP SHIFT SENIOR INSTRUMENTATION TECHNICIAN



Department : Electrical and Automation Maintenance

No. Of Vacancy : 1

Salary : US$ 3158 – 3355 / month



The desired candidate must have a minimum of 3 years experience in the
following:

a. Work Planning: Works to Safety Rules and regulations,
instrumentation maintenance work inspection reports & work orders

b. Analysis and Reporting: Analysis of previous day & shift
activities with Supervisor

c. Team supervision: Guide, monitor and assists train new team
members

d. Problem Solving: Personally provide technical input to the
resolution of major maintenance problems

e. Spare parts management: Assist Supervisor in ensuring proper spare
parts management

f. Conversant with HYL Direct Reduction process

g. Fair knowledge of instrumentation systems related to DRP process

h. Experience with repairs, maintenance and calibration of processing
equipment and instruments

i. Familiar with basic office computer software



Also, Diploma / Trade Certificate (ITI) in Instrumentation / Electronics
Engineering is a must.





4. ENGINEER CONTROL AND AUTOMATION DRP





Department : Electrical and Automation Maintenance

No. Of Vacancy : 1

Salary : US$ 4054 – 5539 / month



The desired candidate must have a minimum of 5 years working experience
in a related field, and must have knowledge in the following:

a. Preparation of automation and instrument drawings, datasheets, I/O
wiring diagrams, P&IDs, specifications, calculations, chart and graphs

b. Review daily automation and instrumentation Maintenance work
orders and classify them into corrective or preventive maintenance
categories

c. Prepare daily management reports based upon analysis of previous
day
's activities

d. Spare parts management: Ensure proper spare parts management

e. Fully conversant with preparation of instrument drawings,
datasheets, I/O wiring diagrams, P&IDs, specifications, calculations,
chart and graphs

f. In-Depth knowledge of Siemens PCS7 system used as distributed
control system for Direct Reduction Plant

g. Fully conversant with HYL Direct Reduction process

h. In-depth knowledge of control and automation systems (PLC, Process
Instruments etc) related to DRP process

i. Expertise and proficiency with basic office computer software



Also, Degree in Electronics / Instrumentation Engineering is a must.





5. ENGINEER ELECTRICAL CRANES



Department : Electrical and Automation Maintenance

No. Of Vacancy : 5

Salary : US$ 4054 – 5539 / month



The desired candidate must have a minimum of 5 years working experience
in a related field, and must have knowledge in the following:

a. Review daily electrical maintenance work orders pertaining to
cranes and classify them into corrective or preventive maintenance
categories

b. Study all electrical maintenance requests and prioritizes them in
order of importance

c. Supervise and execute the maintenance programs as per planning
schedule for both preventive and corrective activities

d. Personally provide technical input and hands-on skills to the
resolution of major maintenance problems

e. Prepare daily management reports based upon analysis of previous
day
's activities

f. Ensure proper spare parts management

g. Fully conversant with operation and maintenance of cranes in steel
plants

h. Fair knowledge of Electrical systems related to cranes

i. Experience with repairs and maintenance of crane equipment

j. Expertise and proficiency with basic office computer software



Also, Degree / Diploma in Electrical / Electronic Engineering is a must.



6. ENGINEER ELECTRICAL MAINTENANCE SUBSTATION



Department : Electrical and Automation Maintenance

No. Of Vacancy : 1

Salary : US$ 4054 – 5539 / month



The desired candidate must have a minimum of 5 years working experience
in a related field, and must have knowledge in the following:

a. Review and approve detail design of medium to extra high voltage
utility substations

b. Review daily electrical maintenance work orders and classify them
into corrective or preventive maintenance categories

c. Study all electrical maintenance requests and prioritizes them in
order of importance

d. Prepare daily management reports based upon analysis of previous
day
's activities

e. Ensure proper spare parts management

f. In-depth knowledge of EHV, HV AND LV specifications and standards

g. In-depth knowledge of design and maintenance of EHV, HV AND LV
equipments

h. In-depth knowledge of EHV, HV AND LV equipments and their
protection settings pertaining to Steel plants

i. Experience with design and maintenance of Electrical substation
equipments

j. Expertise and proficiency with basic office computer software



Also, Bachelor
's Degree in Electrical Engineering is a must.



7. ENGINEER LEVEL 2 AUTOMATION SMP





Department : Electrical and Automation Maintenance

No. Of Vacancy : 1

Salary : US$ 4054 – 5539 / month



The desired candidate must have a minimum of 5 years working experience
in a related field, and must have knowledge in the following:

a. Ensure system availability by maintaining level 2 system hardware
and software

b. Ensure proper functioning of Steel Melting Plant Level 2 functions
as listed but not limited to:
1) Level-1 interface monitoring and diagnostics
2) Models & Services (Problems recovering, Performance monitoring and
parameter tuning, back-

up and recovery)
3) Oracle Database (System monitoring and optimization, Security
administration, Data analysis,

back-up and recovery)
4) Modification of OWS and PWS as per process requirement
5) Developing and maintaining Level 2 reports and Web page
6) Maintenance of Hardware and Networking

c. DRP Level 2 Modules: Ensure proper functioning of DRP Level 2
functions as listed but not limited to:
1) Raw Material Stockyard Management
2) Finished Product Stockyard Management
3) DRP Production report
4) DRP Process reports generation and data-analysis
5) DRP Delay Report
6) DRP Consumption report

d. Fully conversant with WinCC HMI and SCADA package • In-depth
knowledge of MS Visual C, Delphi, Visual Basic software programming and
Oracle Database developer and administrator• Expertise and
proficiency with basic office computer software



Also, Bachelor
's Degree in Electrical / Electronics /
Instrumentation Engineering is a must.

8. HEAD OF ELECTRICAL AND AUTOMATION - DRP MT





Department : Electrical and Automation Maintenance

No. Of Vacancy : 1

Salary : US$ 5214 – 6571 / month



The desired candidate must have a minimum of 9 years working experience
in a related field, and must have knowledge in the following:

a. Review daily electrical maintenance work orders and classify them
into corrective or preventive maintenance categories

b. Study all electrical maintenance requests and prioritizes them in
order of importance so as to prepare daily plans

c. Prepare daily management reports based upon analysis of previous
day
's activities

d. Ensure proper spare parts management

e. In-depth knowledge of Level 1 & 2 Automation systems related to
DRP process

f. In-depth knowledge of Medium Voltage Substations, Transformers,
Switchgears, Drives and Motors

g. In-depth knowledge of Instrumentation of DRP process

h. Fully conversant with HYL Direct Reduction process

i. Expertise and proficiency with basic office computer software

j. Ability to work effectively with Computerized Maintenance
Management System (CMMS), preferably SAP



Also, Bachelor
's Degree in Instrumentation / Electrical /
Electronics Engineering is a must.



9. HEAD OF ELECTRICAL AND AUTOMATION - SMP MT



Department : Electrical and Automation Maintenance

No. Of Vacancy : 1

Salary : US$ 5214 – 6571 / month



The desired candidate must have a minimum of 9 years working experience
in a related field, and must have knowledge in the following:

a. Review daily electrical maintenance work orders and classify them
into corrective or preventive maintenance categories

b. Study all electrical maintenance requests and prioritizes them in
order of importance

c. Prepare daily management reports based upon analysis of previous
day
's activities

d. Ensure proper spare parts management• In-depth knowledge of
Steel Melting and Billet Casting process

e. In-depth knowledge of Level 1 & 2 Automation systems related to
SMP process

f. In-depth knowledge of Medium Voltage Substations, Transformers,
Switchgears, Drives and Motors

g. Expertise and proficiency with basic office computer software

h. Ability to work effectively with Computerized Maintenance
Management System (CMMS), preferably SAP



Also, Bachelor
's Degree in Electrical / Electronic Engineering is a
must.





10. RM2 SHIFT ELECTRICAL TECHNICIAN



Department : Electrical and Automation Maintenance

No. Of Vacancy : 1

Salary : US$ 2462 – 2900 / month



The desired candidate must have a minimum of 3 years experience in the
following:

a. Work Planning: Works to Safety Rules and regulations, electrical
maintenance work inspection reports & work orders

b. Analysis and Reporting: Analysis of previous day & shift
activities with Supervisor

c. Team supervision: Guide, monitor and assists train new team
members

d. Spare parts management: Assist Supervisor in ensuring proper spare
parts management

e. Problem Solving: Personally provide technical input to the
resolution of major maintenance problems

f. Fully conversant with Re-bar Rolling Mill process

g. Fair knowledge of Level 1 Automation systems related to Rolling
Mill process

h. Experience on maintenance of processing equipment (Medium Voltage
Substations, Transformers, Switchgears, PLCs, Drives, Motors etc.)



Also, Diploma / Trade Certificate (ITI) in Electrical / Electronic
Engineering is a must.



11. RM3 DAY SHIFT SENIOR ELECTRICAL TECHNICIAN





Reference Code : EAM-RMSrElecTech

Department : Electrical and Automation Maintenance

No. Of Vacancy : 1

Salary : US$ 3158 – 3355 / month



The desired candidate must have a minimum of 5 years experience in the
following:

a. Work Planning: Works to Safety Rules and regulations, electrical
maintenance work inspection reports & work orders

b. Analysis and Reporting: Analysis of previous day & shift
activities with Supervisor

c. Team supervision: Guide, monitor and assists train new team
members

d. Problem Solving: Personally provide technical input to the
resolution of major maintenance problems

e. Spare parts management: Assist Supervisor in ensuring proper spare
parts management

f. Fully conversant with Re-bar Rolling Mill process

g. Fair knowledge of Level 1 Automation systems related to Rolling
Mill process

h. Experience on maintenance of processing equipment (Medium Voltage
Substations, Transformers, Switchgears, PLCs, Drives, Motors etc.)

i. Familiar with basic office computer software



Also, Diploma / Trade Certificate (ITI) in Electrical / Electronic
Engineering is a must.



12. SMP DAY SHIFT SENIOR ELECTRICAL TECHNICIAN





Department : Electrical and Automation Maintenance

No. Of Vacancy : 2

Salary : US$ 3158 – 3355 / month



The desired candidate must have a minimum of 5 years experience in the
following:

a. Work Planning: Works to Safety Rules and regulations,
instrumentation maintenance work inspection reports & work orders

b. Analysis and Reporting: Analysis of previous day & shift
activities with Supervisor

c. Team supervision: Guide, monitor and assists train new team
members

d. Problem Solving: Personally provide technical input to the
resolution of major maintenance problems

e. Spare parts management: Assist Supervisor in ensuring proper spare
parts management

f. Fully conversant with Steel Melting and Billet casting process

g. Fair knowledge of Level 1 Automation systems related to Steel
Melting and Billet casting process

h. Experience on maintenance of processing equipment (Medium Voltage
Substations, Transformers, Switchgears, PLCs, Drives, Motors etc.)

i. Familiar with basic office computer software



Also, Diploma / Trade Certificate (ITI) in Electrical / Electronic
Engineering are must.





13. SMP SHIFT ELECTRICAL TECHNICIAN





Reference Code EAM-SMPElecTech

Department : Electrical and Automation Maintenance

No. Of Vacancy : 3

Salary : US$ 2462 – 2900 / month



The desired candidate must have a minimum of 3 years experience in the
following:

a. Work Planning: Works to Safety Rules and regulations, electrical
maintenance work inspection reports & work orders

b. Analysis and Reporting: Analysis of previous day & shift
activities with Supervisor

c. Team supervision: Guide, monitor and assists train new team
members

d. Spare parts management: Assist Supervisor in ensuring proper spare
parts management

e. Problem Solving: Personally provide technical input to the
resolution of major maintenance problems

f. Conversant with Steel Melting and Billet casting process

g. Knowledge of Level 1 Automation systems related to Steel Melting
and Billet casting process

h. Experience on maintenance of processing equipment (Medium Voltage
Substations, Transformers, Switchgears, PLCs, Drives, Motors etc.)

i. Familiar with basic office computer software

Also, Diploma / Trade Certificate (ITI) in Electrical / Electronic
Engineering is a must.





If you feel you are match with above positions, you are welcome to send
CV, in MS Word, not more than 300kb to , latest on
March 12, 2010.



Please put position desired in your email subject. We are sorry, only
shortlist candidates will be notified.



For more info
's, please call us or click
http://www.totaldata.co.id/jobsite_abudhabi.htm

PT. Totaldata Persada

021-8477689, 021-84994728. Attn.: Ms. Puput/Ms. Eva


Mr. Admin, thanks for the space.

Our Client, Adcom Dua Dua (www.adcomduadua.com), an integrated
communication firm is seeking people to fill in position with following
experiences and skills :





Public Relation Specialist (PRS - ADC)



Responsibilities :

. The Public Relations Specialist will play a key role, supporting
the Company
's goal.

. Working with senior management, he/she will work on various
initiatives to drive strategic PR campaigns through tactical, comprehensive
and measurable programs.

. Create and present PR strategies to Client with tactical programs
that deliver measurable results

. Write and edit press materials such as press releases, pitches,
briefing sheets, plans, press kit materials, source and brief testimonials
and case studies

. Write and edit messaging and Q&A around announcements/events

. Work with a wide variety of clients to deliver on company goals
and strategies

. Work with contractors and virtual team members.

. Other task as needed



Requirement :

. Highly developed communication skills (verbal, written,
presentation)

. Strategic thinking and ability to execute at all levels

. Proactively identify communications/newsworthy opportunities and
develop supporting programs

. Ability to influence and provide strategic and persuasive counsel
to clients

. A self-starter, detail-oriented, highly organized and able to
manage multiple tasks/projects simultaneously with a sense of urgency

. Thrive in a fast-paced, unstructured environment; work
independently with minimal supervision; adapt easily to new situations

. Work directly with media at all levels

. PR agency experience a plus

. Minimum 1+ years PR experience. Agency experience desired with
consumer technology/product expertise preferred







Interested candidates are requested to send in their complete CV as an
attachment in MS Word Format only in English with current & expected salary
and recent photograph to :





Please put the position applied PRS - ADC on the subject line.

Only short listed candidates will be notified.

If you wish to view our client vacancy, kindly join our mailing list & visit
our website at www.sintesa-resourcing.com