Job Category: Qatar

A major oil producer is looking for a Sr. Reservoir Geophysicist to join their team in Qatar as a seismic interpreter in the Geoscience Group of the Petroleum Engineering Department.

Focus on:
- Structural interpretation of seismic horizons and faults using our recently acquired large high resolution 3D seismic survey, primarily in support of operations and development planning;
- Stratigraphic evaluation and reservoir characterisation of the subsurface, together with other disciplines in Geoscience Group, using qualitative and quantitative data evaluation;
- Participate in designing depth conversion schemes that are compatible with the geological data
- For the experienced candidate the job can be designed to include project management and Team Lead responsibilities


Requirements for the right candidate:
- BSc or higher degree in Geophysics/Geology.
- Strong analytical/communication skills.
- 10 - 15 years of relevant experience

If you are interested please send your CV to Elena Mravlag at

A Major LNG Operator requires a Project Controls Specialist to join them on a permanent residential basis in Ras Laffan, Qatar

Reporting to Head of Project Services the main responsibilities are to:


• Establish initial project budgets and prepare subsequent budget updates for all design and/or construction activities based on an estimate of the selected design alternatives.
• Review trend analyses, budget updates and recommendations for corrective action to assure compliance with company requirements.
• Participates in the preparation of complex phases of the Project Milestone Schedule, Engineering, Construction Summary, Bar Chart and Master Project Schedule.
• Prepare Schedule Analysis Report to identify impact of progress and scope changes on previously scheduled target dates.
• Prepares Performance Measurement Summary to evaluate the utilization of actual man-hours versus budget.
• Participate in schedule review meetings to discuss project status and to assist in developing alternatives to accommodate changes in priorities.
• Provides supervision and guidance to the Cost and Schedule Engineers.
• Monitors the Contractor’s project controls performance in the area of scheduling, progress monitoring and cost estimating and provide advice as necessary to make sure the Company’s objectives are achieved.
• Provides timely advice on cost and schedule impact of changes, modifications or alternatives by keeping abreast of engineering, procurement and construction and maintain project trend and change order log.
• Responsible for the preparation of all of the classified estimates for all projects handled by the Capital Projects organization after Gate 2.

Suitable candidates will have:

• Bachelor of Science in Engineering.
• Minimum of 5 years of experience in cost estimating
• Minimum of 5 years of experience in cost control for projects
• Master of Business Administration (MBA) (Optional).
• 10 years of similar experience in large organizations.
• Experience in Minor Capital Project Expenditure.
• Good written and verbal communication skills.
• Good supervisory skills.
• Good computer skills especially spreadsheets type programs.

On offer is
> TAX FREE SALARY
> FURNISHED COMPANY ACCOMODATION PROVIDED OR ALL INCLUSIVE HOUSING ALLOWANCE IF PREFERRED
> INDEFINITE TERM CONTRACT
> FURNISHING ALLOWANCE
> FREE OF INTEREST CAR LOAN
> HEALTH CLUB MEMBERSHIP
> ANNUAL PERFORMANCE BONUS AS DETERMINED BY MANAGEMENT
> ANNUAL SALARY INCREASE AS DETERMINED BY MANAGEMENT
> MEDICAL & DENTAL CARE
> SHIPPING PAYMENT 300 KG PER ADULT & 20 KG PER CHILD (Max of 4 Children)
> 37 WORKING DAYS ANNUAL LEAVE (EQUIVALENT TO 51 CALENDAR DAYS) & LOCAL OFFICIAL HOLIDAYS
> EDUCATIONAL ASSISTANCE (up to 4 children)
> ANNUAL (Origin) LEAVE TICKETS FOR EMPLOYEE AND FAMILY IF ON MARRIED STATUS
> BI-ANNUAL LEAVE TICKET IF ON SINGLE STATUS

If you are interested please send your CV to Graham Poll at quoting reference 5864.

A major EPC company is looking for a Head of Civil and Structural Department to join their team in Qatar.

Industry Experience:
- Strong oil & gas experience upstream, downstream, product storage & movement, utilities & offsite.
- Must have experience of process plant civil & structural engineering covering buildings (substations, control buildings, warehousing etc), equipment structures, equipment foundations, pipe racks, ground improvement (grading, geotechnical & topographical), roads etc for O&G.


General Experience:
- 15 years core engineering experience in a multidiscipline environment. Must have worked as C&S engineer / lead engineer and have MUST HAVE managed a C&S department for an Engineering organization.
- EPC experience is essential. Excellent leadership, ownership, communication and presentation skills. Experience of managing an eastern work team is essential.
- Core qualification in civil & structural engineering.
- Overseas experience essential, Middle East preferred.

Responsibility:
- Functionally under engineering operations role.
- Sole responsibility for the management of the Civil & Structural engineering department, management & co-ordination of all C&S engineering work and department personnel.
- Ensure efficient C&S engineering support to all projects. All C&S inter-discipline co-ordination with other engineering departments.
- Planning & scheduling of work to meet deadlines.
- Work allocation to engineering personnel.
- Complete department quality control in line with company IMS requirements. Standardization and consistency of timely engineering output. Performance assessment of department personnel.
- Preparation and implementation of department working standards & procedures for efficient and effective work practices.
- Ensuring VALUE ADD is brought to all projects from an EPC perspective. (i.e. SMART design / VALUE engineering).

Reporting Line:
Reports to Engineering Operations Manager.

If you are interested please send your CV to Elena Mravlag at

A major EPC company is looking for a Head of Mechanical and Piping Department to join their team in Qatar.

Industry Experience:
Strong oil & gas experience upstream, downstream, product storage & movement, utilities & offsite


General experience:
- 15 years core engineering experience in a multidiscipline environment. Must have worked as M&P engineer / lead engineer and have MUST HAVE managed a M&P department for an Engineering organization.
- Must have experience of process plant piping, rotating equipment & static equipment for O&G.
- EPC experience is essential. Excellent leadership, ownership, communication and presentation skills. Experience of managing an eastern work team is essential.
- Overseas experience essential, Middle East preferred.
- Core qualification in mechanical and/or process piping engineering.

Responsibility:
- Functionally under engineering operations role.
- Sole responsibility for the management of the Mechanical & Piping engineering department, management & co-ordination of all M&P engineering work and department personnel.
- Ensure efficient M&P engineering support to all projects.
- All M&P inter-discipline co-ordination with other engineering departments. Planning & scheduling of work to meet deadlines.
- Work allocation to engineering personnel.
- Complete department quality control in line with company IMS requirements. Standardization and consistency of timely engineering output.
- Performance assessment of department personnel.
- Preparation and implementation of department working standards & procedures for efficient and effective work practices.
- Ensuring VALUE ADD is brought to all projects from an EPC perspective. (i.e. SMART design / VALUE engineering).

Reporting Line:
Reports to Engineering Operations Manager

If you are interested please send your CV to Elena Mravlag at

Our client, Maze Restaurant by Gordon Ramsay (a First Class Restaurant with
Michelin Star Rating) in Qatar is looking for:

• 

SOUS CHEF

CHEF DE PARTIE

• 

• 

General requirements:

• Fluent in English both written and oral is a must • 

• must have experience
in the similar position at least 2 years
in Hospitality Industry• • 

• 

Interested
candidates are required to apply with comprehensive resume with current
photograph to;

• 

Lazuardi.

Email: or

• 


ONLY SHORTLISTED CANDIDATES WILL BE
NOTIFIED

Our client, an EPC for Oil and Gas based in Qatar is looking for several position below :

Hydraulic Technician
* Disassembles and evaluates hydraulic pumps, motors and cylinders
* Hones, polishes, reseals, reassembles cylinders and hydraulic parts
* Demonstrates job quality, safety and cleanliness
* Demonstrated ability to read hydraulic diagram
* Prior experience working with products such as Bosch Rexroth / Suer Danfoss / Kawasaki preferred.


Hose Crimping Technician
* Manage the hose room, inventory and take ownership of hoses
* Experience in hydraulic hose and fittings
* Perform hydraulic repairing, crimping ad testing


Coating Technician
* Experience working as a coating technician.
* Ability to operate spray gun is essential.
* Prior experience working with products such as Belzona / Chesterton / Thortex preferred.


Bolt Tensioning & Torquing Technician
* Performing a variety of flange joint related services, bolt torque and tensioning.
* Perform bolt-up using hydraulic torque wrenches and / or tensioners
* Set pump pressures and perform bolt load calculations
* Perform on-site pre-heating and stress relieving of a variety of vessels, exchangers and piping.


Onsite Machinist
* Pipe cutting and pipe beveling and heat-treating
* Weld testing and isolation work
* Operate air and hydraulic actuated pipe cutting and beveling tools
* Operate portable ID and OD mount flange facers.


Heat Exchanger Retubing Technician
* Experience in repairing heat exchangers.
* Perform retubing, and rebuilding shell and tube-type heat exchangers.


Leak Sealing Technician
* Performs preventive maintenance and mechanical repairs on utility equipment, including waste heat and co-generation equipment; production equipment;
* Repairs equipment by packing glands, seals, and gaskets. Analyzes problems and takes appropriate corrective action(s).
* Tests equipment for pressure leaks. Also inspects sealing components, O-rings, seals, gaskets, and machine faces.


Chemical Technician
* Experience working as a coating technician.
* Ability to operate spray gun is essential.
* Prior experience working with products such as Belzona / Chesterton / Thortex preferred.


Chemical Engineer
* Experience working as a coating technician.
* Ability to operate spray gun is essential.
* Prior experience working with products such as Belzona / Chesterton / Thortex preferred.


Contracts Engineer
* This position has the overall accountable for bidding and reviewing contracts.
* Estimating costs for heavy industrial, oil and gas, power generation and construction projects.
* Preparing professional proposals to be submitted to clients in response to Requests for Proposals.
* Ability to estimate and evaluate subcontractor quotes, and work closely with other discipline field in compiling a complete project estimate.
* Bachelor’s Degree in related Engineering field (Mechanical)
* Very Good communication skills (Verbal & Written)
* Minimum 4-7 Years of overall working experience.



Send your update CV in word format to :

We have mandate to supply manpower for several shutdown jobs lined up in Qatar in the year 2010.

We are looking for various Shutdown Categories for short term extendable contracts as follows:

Ø Shutdown Managers
Ø Mechanical Engineers
Ø Shutdown Engineers – Mech, E&I
Ø Planning Engineers
Ø Maintenance Planners
Ø Shutdown Supervisors – Mech , E&I , Welding , Piping
Ø QC Inspectors – Welding, E/I
Ø QC Engineers
Ø Sr. QA/QC Engineers


The candidate should be BE / Diploma in related discipline with 5 to 10 years relevant experience in Hard Core Shutdown Jobs.


If your profile matches our requirement, Please send your detailed updated CV in Word Format to

Please mention your DESIGNATION as your SUBJECT LINE.

Please inform your Friends & Colleagues about this opening who fit our required profile and are worth recommending as per your opinion.


Thank You & Regards,

A Major LNG Operator requires a Lead Process Engineer - Commissioning Support to join them on a contract until March 2011 to be based in Ras Laffan, Qatar.

Becoming a member of the Project Management Team with responsibilities for leading a team of process engineers tasked with supporting the commissioning and start-up of 2 LNG trains and associated facilities, the Lead Process Engineer
's main function will be to lead the process commissioning activities on behalf of the company to ensure that the facilities are commissioned, tested and started-up in accordance with Project and/or Vendor Pre-commissioning and Commissioning Procedures.

Within this area of responsibility he/she will be required to:


• Ensure Project and Company safety standards are met or exceeded.
• Manage and lead the activities of a group of engineers and specialists.
• Provide technical support to Company operations during commissioning and start-up of the Project facilities.
• Coordinate and lead a team of process engineering experts to ensure that the plant is safely commissioned and started-up in accordance with Project specifications and standards.
• Monitor the activities of outside resources including contractors, vendors, and licensors during the commissioning and start-up of the facilities.

Suitable candidates will be a Professionally-qualified Engineer with at least 15-20 years Process design and commissioning and team leadership experience, including significant relevant experience on large multi-national and multi-location projects.

The position requires significant on-site leadership experience in the commissioning and starting-up of facilities in many of the following specific categories:
• Gas processing (LNG/NGL).
• Sulfur recovery (SRU).
• Pipelines and plant inlet receiving systems.
• Peripheral processing units and utility systems including: steam, fuel gas, flare, cooling water, and water treatment and disposal systems.

The position requires an ability to liaise effectively at all organizational levels and to represent the Project on Process engineering matters.

The incumbent shall also:
• Be able to cope in a positive and productive manner in a team leadership position, within a high-pressure environment as expected in a large Project with an aggressive schedule.
• Have knowledge and experience in personal computing skills, including MS Outlook, Microsoft’s Windows Office suite of applications, and process simulation applications such as HYSIS.
• Be able to work well as a member of a large international multi-ethnic Project Team.
• Be willing to travel internationally for extended periods of time and to live outside his home country.
• Have good oral communication abilities and writing skills in the English language

On offer is a competitive tax free day rate in USD with a monthly accommodation and transport allowance available on a 12x2 rotation with single status.

If you are interested, please send your CV to Graham Poll at quoting reference 5691.

A major oil and gas company is looking for an Instrument Engineer - PMC Lead to join their team in Qatar.

Responsibilities:
Responsible for monitoring the EPC Contractor
's construction activities particularly in the areas of loop and functional testing of Instrument Systems and Equipment.


Within these areas of responsibility he will be required:
- To promote and comply with the Project Health, Safety and Environmental Policies and Procedures and encourage compliance by others.
- To co-ordinate and provide engineering expertise to ensure that the plant is designed and will function in accordance with the Project Integrated Basis of Design.
- To monitor the EPC Contractor in the execution of his responsibilities under the EPC Contract.
- To ensure that interfaces with other parts of the Project and all Project stakeholders are adequately managed and properly engineered.

Experience and Qualifications:
- Professionally-qualified Engineer with qualifications in the Process, Electrical or Electronic Engineering disciplines
- At least 10 - 15 years Instrument and Control experience, including significant relevant experience on large multi-national and multi-location projects.

Significant experience in the following areas is required:
- Process control and measurements
- Foundation Fieldbus specification, design and operation
- HART communication
- Instrument and Control System testing, installation and commissioning.

The position requires an ability to liaise effectively at all organizational levels and to represent the Project on Instrument related matters.

The incumbent shall also:
- Be able to cope in a positive and productive manner within a high-pressure environment as expected in a large Project with an aggressive schedule.
- Have knowledge and experience in personal computing skills, including MS Outlook and Microsoft
's Windows Office suite of applications.
- Be able to work well as a member of a large international multi-ethnic Project Team.

If you are interested please send your CV to Elena Mravlag at

A major oil and gas company is looking for an Instrument Engineer - Commissioning Support to join their team in Qatar.

Main Responsibilities:
Responsible for developing the scope of instrument commissioning activities for the Project. After Mechanical Acceptance he will be responsible for supporting commissioning and start-up of the Facilities.
Within these areas of responsibility he/she will be required to:
- Ensure Project and Company safety standards are met or exceeded.
- Coordinate and provide instrument engineering expertise to ensure that the plant is safely commissioned and will function in accordance with the established project specifications and standards.
- Monitor and drive the activities of outside vendors, contractors, and consultants responsible for commissioning various systems under Project agreements.


Experience and Qualifications:
- Professionally-qualified Engineer with qualifications in the Process, Electrical or Electronic Engineering disciplines
- At least 10 - 15 years Instrument and Control experience, including significant relevant experience on large multi-national and multi-location projects.

Significant on-site experience in one or more of the following areas is required:
- Instrument and Control System testing, installation and commissioning.
- Process control and measurement
- Foundation Fieldbus specification, design and operation
- HART communication

The position requires an ability to liaise effectively at all organizational levels and to represent the Project on Instrument related matters.

The incumbent shall also:
- Be able to cope in a positive and productive manner within a high-pressure environment as expected in a large Project with an aggressive schedule.
- Have knowledge and experience in personal computing skills, including MS Outlook and Microsoft
's Windows Office suite of applications.

If your are interested please send your CV to Elena Mravlag at